mortar bed การใช้
- The mortar bed provides a smooth, even surface that will prevent that rocking.
- The building lies on a high mortar bed.
- The stone is then lowered onto the mortar bed, and positioned with sharp taps from a rubber mallet.
- As the slurry coat dried it would bond the mortar bed to the concrete surface on which it was installed.
- If the mortar bed is not that even, then use smaller tiles, which would be less likely to crack from tension.
- Slade's design specified that two mortars be installed, one capable of 10-inch shot and the other of 13-inch, for use against fortifications.
- The " church proper ", which has never been studied systematically, Together with the Eski Imaret Mosque, provides an example of the mortar bed.
- It was also ordered that 140 light mortars be placed to knock enemy troops from walls during a final assault and to perform nighttime bombardments.
- "' Bedding a stone using a lewis "': The stone is placed on dunnage laid flat with enough clearance for a mortar bed to be placed beneath it.
- Traditionally, tile setters bonded the tile to a sturdy mortar bed that consisted of a 1 1 / 4inch thick layer of cement troweled over wire lath nailed to the framing.
- The commission's permit, which expires Aug . 20, 2003, sets guidelines including that the restoration be documented with photographs and that new mortar be the same color and composition as the original.
- Block cores are typically tapered so that the top surface of the block ( as laid ) has a greater surface on which to spread a mortar bed and for easier handling.
- Porter was a master of intrigue who had the ear of Assistant Secretary Fox, and Farragut had to let the mortars be tried, despite his strong personal belief that they would prove worthless.
- Setup of mortars in Canada for an oblong firing site require that a mortar be configured at an angle of 10 to 15 degrees down-range with a safety distance of at least 200 meters down-range and 100 meters surrounding the mortars, plus distance adjustments for wind speed and direction.